After the automatic filter accesses the piping system, the water enters the filter from the water inlet, and the water from the filter flows out from the water outlet. When the impurities in the water pass through the mesh core, the volume is larger than that of the mesh core hole, and the viscera is intercepted by the mesh core. When a certain amount is accumulated, there is a certain pressure difference between the water inlet and the water outlet.

At this time, the rotating mesh core is automatically backwashed in turn, and the water flow vertically scours the dirt in the filter. The net core structure of the exhaust muffler quickly and thoroughly discharges the dirt, which avoids the interference of adjacent positive water flow, and all impurities are discharged from the dirt outlet. This goes on and on.

When the user selects the automatic filter, when the garbage accumulates to a certain amount, the differential pressure signal between the inlet and outlet pipes of the cooling water is used to open the electric discharge valve, and the garbage attached to the inner wall of the mesh core is reversely cleaned, and the cooling water pipe is discharged through the discharge bucket, discharge pipe and discharge valve. Once the pollutant discharge bucket is further rotated, it is aligned with each partition wall of the spherical mesh core in turn for backwashing.

Submit.

The backwashing industrial filter can replace the small filter of the secondary filter, and can freely choose the precision. The steam muffler is small in size and low in cost. Generally, it does not need to increase the power source. It only needs to be manually operated. The handle rotates in turn according to the fixed position of the target on the product. Several filter chambers inside the filter can be cleaned one by one. The operation mode of automatic backwash filter electronic control system It can be divided into automatic control mode, manual control mode, stainless steel muffler type and electric control mode.